Orange PLA Filament 1.75mm
• 1.75mm - 1Kg 3D Printer Filament Spool
• Print Temperature: 195°C - 220°C
• Less Warping
• No Heat Bed Required
• Eco-Friendly
• Ships vacuumed sealed with silica gel desiccant to keep dry and primed for out-of-the-box printing.
PLA, or Polylactic Acid, is a type of biodegradable plastic commonly used in 3D printing
Here are a few general tips for printing with PLA:
Print at a temperature between 180-220°C, with the hot end at 220°C and the bed at 60°C.
Use a brim or raft to improve bed adhesion.
Use a cooling fan to improve layer adhesion and reduce warping.
Use a print speed of 30-60 mm/s for best results.
Keep in mind that these are just general guidelines and the optimal print settings will depend on the specific printer and filament being used. It may be necessary to experiment with different settings to achieve the best results.
Makes:
EFUGY PLA PRO: Your Eco-Friendly Choice for 3D Printing
EFUGY PLA PRO, a distinct composite of PLA, stands as one of the preeminent choices for 3D printing enthusiasts around the globe. Derived from corn grain, this biodegradable and environmentally friendly material champions not only eco-consciousness but also enhanced printing performance. Special additives facilitate a lower melting point, vibrant output, and ease of support removal, ensuring an unparalleled 3D printing experience.
Key Features
Pristine Color: Achieved without the use of any artificial brighteners, maintaining the material's natural aesthetics.
Lower MFI: Significantly lesser than standard PLA, enhancing the print quality.
Stable Surface Printing: Ensures no drooping issues during the printing process.
Low Viscosity: Allows for effortless support removal post-printing.
Temperature Management: Guarantees burr-free, consistent temperature results for every print.
Robust Toughness and Precision: Ensures durability with a diameter accuracy of ±0.03mm, backed by a 100% quality assurance guarantee.
Wide Compatibility: Compatible with nearly all FDM printers available on the market.
Packaging Details
- 1kg Spool
**Note**: Every package contains a sealed and securely boxed spool to maintain the filament's quality.
Filament Specifications
Physical Properties
- Density**: 1.21-1.30g/cm³ *(Tested as per GB/T1033.1-1986)
- Mechanical Properties
- Tensile Strength**: 17-18 (25um, as per ASTM D1992), ≥50Mpa *(GB/T1040-1992)
- Elongation at Break**: 4.6-5.3% *(GB/T1040.1-1992)
- Impact Intensity**: 1-3 KJ/M² (Izod2, GB/T1043-1992)
- Thermal Properties
- Vicat Softening Point: 61.5℃ *(GB/T19466.2-2004)
- Melting Index: 4-6 g/10min at 190 ℃, 2.15kg *(GB/T3682-2000)
- Melting Point: 178.5 ℃ *(GB/T19466-2004)
Printing Properties
- Printing Temperature: 190-220 ℃
- Hot Bed: 0-40℃
- Fan Layer: Off (Max 20%)
Size and Packing Characteristics
- Diameter**: 1.75mm
- Packaging: SmartBag with security seal to ensure product integrity.
